The secret to gum removal for concrete is using the right method, not the most pressure. In Algona, WA, we match the cleaner and pressure to the surface so it comes out clean without damage. For concrete, that means pressure wash with a surface cleaner.
The right method for the job
Cleaning solution: A degreaser for oil spots and a pre-treatment for organic growth; post-treatment slows regrowth.
What to know about cleaning concrete
Plain broom-finish concrete is the surface pressure washing is made for. A rotary surface cleaner gives an even finish without the stripes a wand leaves, and hot water helps with grease and oil.
Avoid: Holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete.
How often: Every year, or every 6 months in shaded, damp spots.
Signs you need gum removal for concrete
- Black dots across entrances and walkways
- Gum on steps and near benches
Why it gets dirty
- Foot traffic
- Gum hardening and collecting dirt
Safe steps for homeowners
- Scrape fresh gum before it gets ground in
- Put bins near entrances
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Cold-water pressure alone smears gum and etches the concrete
- Chemical removers that stain
Our process for gum removal for concrete
- Survey the area
- Soften gum with hot water or steam
- Remove it with a surface cleaner and detail tools
- Clean the surrounding area for an even look
- Schedule maintenance visits if needed
Typical gum removal for concrete prices
What moves the price:
- Area and number of buildings
- Scheduling: early-morning, overnight or weekend work
- Whether wash water has to be recovered under local stormwater rules
- Frequency: recurring service is usually priced lower per visit
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Other services for concrete
- Pressure Washing for Concrete
- Driveway Cleaning for Concrete
- Sidewalk & Walkway Cleaning for Concrete
- Patio Cleaning for Concrete
- Pool Deck Cleaning for Concrete
- Concrete Sealing for Concrete
- Rust Stain Removal for Concrete
- Oil Stain Removal for Concrete
- Graffiti Removal for Concrete
- Efflorescence Removal for Concrete
- Exterior Mold & Mildew Removal for Concrete
- Commercial Pressure Washing for Concrete
- Parking Lot & Garage Cleaning for Concrete
- HOA & Apartment Pressure Washing for Concrete
Local gum removal for concrete for Algona, WA
In Washington, commercial properties mostly need moss and algae removed from walkways and entrances to reduce slip hazards, plus regular building washing.
Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.
Besides Algona (ZIP codes 98001, 98047 and 98071), we handle gum removal for concrete in Pacific (1 mi), Lakeland South (1.5 mi), Auburn (2.2 mi) and Edgewood (2.8 mi). Call (555) 010-0000 for a free quote in Algona.
Gum Removal for Concrete: frequently asked questions
How much does gum removal for concrete cost in Algona, WA?
Gum Removal for Concrete typically costs $200-$1,000 depending on the area and how much gum there is, and usually takes 2-6 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for gum removal for concrete?
For concrete: usually 2,500-3,500 PSI with a rotary surface cleaner for even results. What we avoid: holding a narrow tip close to the surface, which etches lines into the cream layer of the concrete. We keep the pressure even and controlled, with the right tools for the surface.
Is gum removal for concrete safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule gum removal for concrete?
Every year, or every 6 months in shaded, damp spots. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.